en de nl
Introduction EFP 65tb Window & Door systems.

EFP 65tb Window & Door systems enables the construction of attractive and & high quality windows & doors, with the benefits of slim sightlines.

This system consist of many of standard profiles and many custom made profiles are available up on request.

Specification summary:

EFP 65tb W&D range is a pressure equalised, fully drained, thermally broken system which consists of 65 mm or 110mm deep frames & vents. Various alternative profiles with slim side lines from 24-30-40 and 50mm are available for this system.

The smallest sight line can be achieved using a 24mm wide Frame + 47mm Vent and have externally a typical minimum edge radius of 0.5mm, edge radii for even distribution of the powder coating layer.

Specification summary continued:

  • GlazingThe system is glazed from the inside or outside. Glass should conform the requirements of BS 6262 for thickness and type, in terms of wind resistance, safety and security.
  • DrainageThe system is fully drained & pressure equalised, achieved by meeting the requirements of “Ventilated and drained glazing system” as specified in BS 6262
  • Frame / Vent Glazing depth is 65mm, standard glazing thickness from 4 to 50mm
  • Thermal insulationStandard configuration:  Uf Value up to 2.5 W/m2K
  • The thermal transmittance ( Uf ) W/m2 K, is depending on the insulator strip, this as calculated as per EN ISO 10077-1. Comparable with class 1.0 /2.1 DIN 4108-4 Table 3
  • Sound insulationDepending largely upon the glass specification, generally the window framing reduces the figure by 2 db (A)
  • MaterialsThe system is constructed from extruded aluminium profiles, using alloy 6063 complying the requirements of BS 1474. The thermal barrier system is achieved by means of a Polyamide (PA 66-GF25), glass fiber reinforced extrusion from “Technoform Germany”.
  • ConstructionAny instructions regarding the manufacture and installation of the system must be strictly adhered to.
  • WeatheringGlazing vision strips are made of EPDM conforming to BS 4255 Part 1.
  • Performance / exposure category The system has been designed according to the latest EN standards and will meet the highest levels when manufactured, installed and glazed to EFP recommended procedures.
  • Size limitationsThe size limitation of the system depends mainly on vent sizes versus ironmongery and on the mullion/transom members used to suit the span, spacing and wind/dead loads, which are specific for each individual project
  • Window Types The systems consist many different window types like: side hung, top & bottom hung, tilt & turn glazed from inside or outside, opening inside or outside, etc.
  • Door Types The system consist of many different door types like: single & double doors, structural glazed doors, opening in or outwards etc.
  • Hardware or Ironmongry (hinges / handles / locks etc) The “Euro Groove” system has been designed around and does comply with most commonly used European brands.
Typical Window Jamb Typical Door Jamb

Window 100mm deep frame

Other options within EFP 55tb + 65tb Windows & Doors
EFP 55tb Doors EFP 65 tb Windows EFP 65 tb Doors